AD633

The AD633 is a functionally complete, four-quadrant, analog multiplier. It includes high impedance, differential X and Y inputs and a high impedance summing input (Z). The low impedance output voltage is a nominal 10 V full scale provided by a buried Zener. The AD633 is the first product to offer these features in modestly priced 8-lead plastic DIP and SOIC packages.

The AD633 is laser calibrated to a guaranteed total accuracy of 2% of full scale. Nonlinearity for the Y-input is typically less than 0.1% and noise referred to the output is typically less than
100 mV rms in a 10 Hz to 10 kHz bandwidth. A 1 MHz bandwidth, 20 V/ms slew rate, and the ability to drive capacitive loads make the AD633 useful in a wide variety of applications where
simplicity and cost are key concerns.

The AD633's versatility is not compromised by its simplicity. The Z-input provides access to the output buffer amplifier, enabling the user to sum the outputs of two or more multipliers, increase the multiplier gain, convert the output voltage to a current, and configure a variety of applications.

The AD633 is available in an 8-lead plastic DIP package (N) and 8-lead SOIC (R). It is specified to operate over the 0°C to +70°C commercial temperature range (J Grade) or the 40°C to
+85°C industrial temperature range (A Grade).

Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............. ±18 V
Internal Power Dissipation2 . . . . . . . . . . . . . . . . . . . ................. 500 mW
Input Voltages3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .............. ±18 V
Output Short Circuit Duration . . . . . . . . . . . . . . . . ....................Indefinite
Storage Temperature Range . . . . . . . . . . . . . ...........65°C to +150°C
Operating Temperature Range
AD633J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .................. 0°C to +70°C
AD633A . . . . . . . . . . . . . . . . . . . . . . . . . . . ..................40°C to +85°C
Lead Temperature Range (Soldering 60 sec) . . . . . . . ............... +300°C
ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .................. 1000 V
NOTES
¹Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. ²8-Lead Plastic DIP Package: qJA = 90°C/W; 8-Lead Small Outline Package: qJA = 155/W.